OriGlam Portable Electric Balloon Blower Pump, Dual Nozzle Balloon Air Inflator, 110V 680W with 2 Inflation Nozzles for Decoration

Features: Power: 800W Material: Plastic Power Voltage: US 110 - 120V Type: Ballon Pump Shape Style: Round Product Name: Square Balloon Inflator Features: - Equipped with a time and speed controller, users can accurately adjust the inflation speed and set the desired time limit, allowing for customized inflation based on the type and size of the balloon. Performances: 1.Plug in the power supply. 2.3 Put a 10-inch latex ball around the air nozzle. 3.Put the switch in "I" gear. 4.Inflate the balloon with the pressure nozzle, release and stop the exhaust. 5. Twist the small air nozzle clockwise into the air nozzle. 6. Put a small latex ring ball on the air nozzle. 7. Press the air nozzle to inflate the balloon, release and stop the exhaust. 8.When gas is not used, turn the switch to gear 0. Use steps if time and speed control are required: (time and speed controller) 1.Put the switch in the "II" file and the time display screen will light up. 2.Press the first time button, and the number on the right side of the screen will jump (milliseconds). 3.Press the second time button to adjust the time you want (0.1-9.9). 4.After you adjust the time you want, press the first time button to confirm. 5.If you think the wind speed is fast, you can turn the speed control button to the right and the wind speed will be slower. 6.After setting the time you want, Press the second power start button( green button).That is to start according to the set time inflatable. Warning: (Please take a look) - Do not store or use inflator in wet conditions. - Never exceed recommended pressure, otherwise, serious injury might be caused by the bursting. - Never leave the pump unattended while it's in use, please turn off when the inflator is not using. - Never allow sand, small rocks, etc, to be sucked into inflation port & nozzles when using the pump. - Do not work the motor for more than 60 minutes, If the motor is hot, please pause the use of 30 minutes. Wait for it to cool down and then continue to inflate (too high temperature will easily burn the motor). - Stop the use if the pump is damaged, especially the supply cord and the case, don't immerse the pump in liquid. - Pumps need regular maintenance. - Never look into or point at your eyes when the pump is in use. - Our balloon pump is only compatible with thin latex balloons with a thickness of less than 3.2 grams. But if the thickness exceeding 3.3 grams or more, our balloon pump may not have enough power to inflate it.Not suitable for twisting modeling long balloon for animal shape. - When the machine uses the motor to generate wind, a little noise will be produced, and heat generation after use are normal phenomena. It is recommended to use it for two hours and then take a 10 - minute break, which can extend its service life. In hot weather, if a sparking phenomenon occurs during use, you should stop using it immediately. Product Weight : 1607 G / 56.69 Ounces Product Dimensions (L*W*H) : 15.0*19.0*14.0 CM / 5.91*7.48*5.51 Inches Package Weight : 1608.0 G / 56.72 Ounces Package Dimensions (L*W*H) : 16.0*20.0*15.0 CM / 6.30*7.87*5.91 Inches Package Include: 1 x Balloon Pump 2 x Small Tips 1 x User Manual

• √ Powerful Air Pump - Inflating the balloons in a fast speed with two inflation ports.
• √ Fit For Latex Decorative Balloon - Double pump, balloon air pump. Inflate balloons quickly under high pressure.
• √ Time And Speed Controller - With the time controller and speed controller, can adjust the inflating time and the speed .
• √ Touch-on Switch - Just put the small tips on the nozzle, then press the nozzle slightly, and it will inflate the balloon.
• √ Warm Tips - This electric balloon inflator pump is used to inflate latex balloons. Our balloon pump is only compatible with thin latex balloons with a thickness of less than 3.2 grams. But if the thickness exceeding 3.3 grams or more, our balloon pump may not have enough power to inflate it. If the pump is too hot, please stop using it for 30 minutes. When it cools down, and then work. If time controller does not work, please check our operating instructions or for a return, thank you.